Still EXH 25 Скачать руководство пользователя страница 78

Страница: 78 / 130

Charging the battery using an exter-

nal charger

CAUTION

Deep discharging may damage the battery.

–

Charge the battery immediately.

The fixed socket on the truck (1) is located

above the battery and under the battery hood.

–

Park the truck safely.

–

Before charging, check the condition of the

battery cable and the charger cable. Re-

place them if necessary.

–

Open the hood and leave it open.

–

Pull the handle of the battery connector (2)

to disconnect it from the fixed socket on the

truck (1).

–

Connect the battery connector to the wall-

mounted connector.

WARNING

Electrical risk
Only unplug the battery connector from the battery

charger when both the battery charger and the truck

are switched off.

NOTE

Follow the instructions provided by the manu-

facturer of the battery and the battery charger

(equalising charge).

WARNING

Risk of damage, short circuit or explosion.
Do not place any metal objects or tools on the bat-

tery.
Smoking is prohibited.

WARNING

The electrolyte (diluted sulphuric acid) is toxic and

very caustic.
Follow the safety regulations when handling battery

acid.



Use

Handling the battery

11538011551 EN - 02/2021 - 08

Содержание EXH 25



































































































































Результаты поиска

Содержание EXH 25

Отзывы:

Still EXH 25, Оригинальное руководство пользователя, Страница: 78 / 130

Результаты поиска

Содержание EXH 25

Отзывы: