Still EXH 25 Скачать руководство пользователя страница 77

Страница: 77 / 130

Parking the truck securely

When the battery is being worked on, the truck

must be parked safely. The truck can only be

restarted when the covers and connectors

have been put back in the operating position.

Opening and closing the battery

hood

Opening the battery hood

To open the battery hood:

–

Immobilise the truck.

–

Lower the load arms.

–

Switch off the ignition (key or electronic

key).

–

Press the emergency off switch.

–

Lift the hood (1) using the handle designed

for this purpose.

Closing the battery hood

To close the battery hood:

–

Close the hood (1).

WARNING

Risk of trapping fingers
When closing the battery hood, correctly position

your fingers to avoid any risk of them being trapped.

–

Ensure that the battery hood is closed se-

curely.

CAUTION

Risk of sparks
Never drive with the hood open or incorrectly closed.



Use

Handling the battery

11538011551 EN - 02/2021 - 08

Содержание EXH 25



































































































































Результаты поиска

Содержание EXH 25

Отзывы:

Still EXH 25, Оригинальное руководство пользователя, Страница: 77 / 130

Результаты поиска

Содержание EXH 25

Отзывы: