Still EXH 25 Скачать руководство пользователя страница 76

Страница: 76 / 130

Handling the battery

Battery type

Trucks can be fitted with different types of bat-

tery. Comply with the information indicated on

your battery's type plate, as well as with its

features.

WARNING

The weight and size of the battery influence the sta-

bility of the truck.
The new battery must weigh the same as the old

one. Do not remove extra weight or change its posi-

tion.

CAUTION

Be careful not to damage any wiring when replacing

the battery.

Order picking

Maintenance personnel

The battery must be replaced by specially

trained personnel. Personnel must follow the

manufacturer's instructions for the battery, the

charger and the truck.
It is also necessary to follow the battery main-

tenance instructions.

Fire protection measures

WARNING

Do not smoke or create a flame when

handling batteries. There must be no

combustible material or tools that pro-

duce sparks within a minimum radius of

2 m around the truck and the battery

charger.
The work area must be well ventilated.

Fire extinguishers must be provided and

located near the work area.

Use

Handling the battery

11538011551 EN - 02/2021 - 08

Содержание EXH 25



































































































































Результаты поиска

Содержание EXH 25

Отзывы:

Still EXH 25, Оригинальное руководство пользователя, Страница: 76 / 130

Результаты поиска

Содержание EXH 25

Отзывы: