Still EXH 25 Скачать руководство пользователя страница 101

Страница: 101 / 130

Accessing the technical com-

partment

WARNING

Risk of injury.
Before removing anything, turn the ignition off and

press the emergency stop button.

To access the technical compartment, it is

necessary to lift the top hood (1) and remove

the front hood (2).
Proceed as follows:

–

Remove the four screws (3) from the top

hood (1).

–

Lift the top cover slightly.

–

Remove the two screws (4) from the front

hood (2).

–

Remove the front hood.

The technical compartment must be closed

once the operation is finished.

–

Remove the front hood (2).

–

Tighten the two screws (4) of the front

hood.

–

Reposition the top hood (1).

–

Tighten the four screws (3) of the top hood.

–

Return the truck to service.



Maintenance

Accessing the technical compartment

11538011551 EN - 02/2021 - 08

Содержание EXH 25



































































































































Результаты поиска

Содержание EXH 25

Отзывы:

Still EXH 25, Оригинальное руководство пользователя, Страница: 101 / 130

Результаты поиска

Содержание EXH 25

Отзывы: