background image

Forklift Towing

The forklift may not be towed in the case of

breakdown.
The forklift must be lifted with due caution, as

described on the preceding pages.

Temporary Putting Out of Commission

The following operations must be performed

when the forklift is not going to be used for a

long time:

Clean the forklift as indicated in the "Main-

tenance" chapter and put it in a dust-free

and dry room. -

Lower the forks.

Lightly grease all of the unpainted parts with

oil or grease.

Perform the lubrication operations indicated

in the maintenance chapter.

Remove the battery and put it in a room

where there is no danger of freezing.

Charge the battery at least once a month.

Raise the forklift so that the wheels do not

touch the ground; otherwise, the wheels will

become flat at the point of contact with the

floor.

Cover the forklift with a NON-plastic sheet.

Checks and Inspections After a Long Period of Inactivity

 DANGER

Perform the following operations before using the

forklift:

Clean forklift truck thoroughly.

Check the battery charge level and reas-

semble it in the forklift, making sure to

spread Vaseline on the terminals.

Lubricate all of the parts provided with lubri-

cating nipples and the chains.

Carry out the fluid level checks.

Perform all of the functional maneuvers of

the forklift and of its safety devices both loa-

ded and unloaded.

 DANGER

Follow the instructions provided in the maintenance

chapter for the operations indicated previously.

Maintenance

5

Decommissioning

 73

45628043489 EN - 11/2021  -  04

Содержание ECU-30





























































































Отзывы: