Still ECU-30 Скачать руководство пользователя страница 47

Страница: 47 / 92

Please remember the following:

●

Drive the truck as described in the "Opera-

tor positions" section.

●

The truck must not be used as a stepladder.

●

The truck has not been designed to trans-

port anyone other than the operator and

must not be used for this purpose.

●

The operator must always stay within the

truck clearance.

●

Stay in the safety area (working area de-

fined by the manufacturer).

NOTE

Using a telephone or radio in the truck is per-

mitted, but avoid using these devices when

driving as they may distract you.

People in the danger area

Before starting the truck and while you are

working, ensure that no one is in the danger

area. If people are in danger, warn them well

in advance. Stop working with the truck imme-

diately if the people do not leave the danger

area despite the warnings.

DANGER

Risk of injury! There is a risk of physical injury in-

side the danger area. Danger of death from falling

loads!
Do not stand on the forks!
Standing or walking under the forks is strictly forbid-

den, even when they are not loaded!

Danger area

The danger area is the area in which people

are in danger from the forklift truck move-

ments, from its work equipment and from its

load lifting devices (e.g. accessories) or from

the load. The danger area also includes areas

in which a load could fall or in which work

equipment could lower or fall.

Traffic route conditions

The surface of traffic routes must be sufficient-

ly level, clean and clear of objects. Drainage

Use and operation

Authorised and safe use

45628043489 EN - 11/2021 - 04

Содержание ECU-30





























































































Результаты поиска

Содержание ECU-30

Отзывы:

Похожие инструкции для ECU-30

Бренды по названию

Популярные бренды

Still ECU-30, Оригинальное руководство пользователя

Результаты поиска

Содержание ECU-30

Отзывы:

Похожие инструкции для ECU-30

Бренды по названию

Популярные бренды