Still ECU-30 Скачать руководство пользователя страница 59

Страница: 59 / 92

Load placement

Safety guidelines for handling

loads

WARNING

Closely observe the following instructions before

picking up loads. Never touch or stand on moving

parts of the truck (e.g. lifting devices, equipment or

devices for picking up loads).

WARNING

Risk of crushing hands and feet when using the lift.
When using the lift, keep hands and feet away from

moving parts.

DANGER

It is not permitted to go under the forks. It is not

permitted to transport or lift people on the forks.
If there are people under or on top of the forks, do

not move the truck. Do not move the forks and do not

drive the truck.

DANGER

Risk of accident when forks are changed:
If the forks are changed and a different type of forks

to the original forks is fitted, the residual load capaci-

ty changes.
When forks are changed, a new residual capacity

plate must be affixed.
If a truck is supplied without forks, the residual ca-

pacity plate for standard forks is affixed (see chapter

6 "Technical Data").

DANGER

Wear protective footwear. Always keep a suitable

distance between your feet and the truck.
Risk of crushing feet when manoeuvring the truck.

CAUTION

The transport of persons or passengers is strictly

prohibited.

Use and operation

Load placement

45628043489 EN - 11/2021 - 04

Содержание ECU-30





























































































Результаты поиска

Содержание ECU-30

Отзывы:

Похожие инструкции для ECU-30

Бренды по названию

Популярные бренды

Still ECU-30, Оригинальное руководство пользователя

Результаты поиска

Содержание ECU-30

Отзывы:

Похожие инструкции для ECU-30

Бренды по названию

Популярные бренды