Still ECU 15C, Оригинальное руководство пользователя

Страница: 62 / 78

5
Maintenance
General maintenance information
General maintenance information
General
The following instructions contain all the
information required for servicing your truck.
Carry out the various maintenance work in
compliance with the maintenance plan. This
will ensure that your truck is reliable and in
good working order and that the warranty
remains valid.
Maintenance should only be carried out by
authorised technicians, or by authorised deal-
ers in accordance with a signed maintenance
contract.
Modifying or installing additional equipment
on the forklift truck is prohibited without the
agreement of the manufacturer.
NOTE
If the data plates or affixed labels are incom-
plete or damaged, they should be replaced
with new ones. For locations and reference
numbers, please see the spare parts catalo-
gue.
CAUTION
If the forklift truck is used in an extreme environment
(such as excessive heat, excessive cold or areas
with high dust concentrations), the time intervals
given in the maintenance tables should be reduced
accordingly.
ENVIRONMENT NOTE
Please comply with regulations regarding
the use, handling and disposal of fuel and
lubricating oil.
The forklift must undergo functional testing
and a trial run after each inspection.
Service plan
Maintenance work must be carried out accord-
ing to the maintenance checklist.
The service plan is followed by advice to
facilitate work.
Maintenance intervals must be reduced if the
truck is used under harsh conditions (extreme
heat or extreme cold, large quantities of dust).
Grade and quantity of lubricants and
other consumables
Only lubricants and other consumables
specified in these operating instructions are
authorised for use during maintenance work.
Lubricants and other consumables required
for truck maintenance are listed in the mainte-
nance specifications table.
Never mix different qualities of grease or oil.
If it is absolutely necessary to change brands,
make sure to flush thoroughly beforehand.
Before changing any filters or working on
the hydraulic system, thoroughly clean the
surface and the areas around the part.
All containers used to pour oil must be clean.
Daily inspection
This chapter describes pre-shift checks before
putting the truck into operation.
Daily inspection is effective to find the mal-
function or fault on this truck. Check the truck
on the following points before operation.
Remove load from truck and lower the forks.
CAUTION
Risk of injury.
Don't use the truck if any malfunction is found.
• Check for scratches, deformation or cracks.
• Check if there is any oil leakage from the
cylinder.
54 1133 801 16 01 EN - 11/2018