Still ECU 15C, Оригинальное руководство пользователя

Страница: 51 / 78

Operation
4
Check and actions prior to use
Battery indicator
1 Battery discharged
2 Battery full charged.
The discharge status is indicated by ten red
LED segments.
• Only when the battery is properly charged,
the most right LED lit. As the battery’s
state-of-charge decreases, successive
LEDs light up, only one on at a time.
• The 2nd from left LED flashes, indicating
“energy reserve” (70% depth of discharge).
• The 2 most left LEDs alternately flash, indi-
cating “empty” (80% depth of discharge).
1 Charging LED
Charging
NOTE
• The attached automatic charger is only
available for the optional voltage of 110V or
220V as referred.
• The room, where you are charging must be
ventilated.
• The exactly charge status can be only
checked from the dischrge indicator. To
control the status, the charging must be
interrupted and the truck must be started.
Park the truck at a dedicated secured area
with a dedicated power supply. Lower the
forks and remove the load. Switch the truck off
and connect the main power connector to the
power supply. The charger starts charging
the battery. Charging is finished until the
charging LED(1) produces permanent green
light. The charger then goes into a floating
mode to prevent the battery against damages.
Following table shows the function of the
LED-status:
LED-signal
Function
Red
Battery discharged
1133 801 16 01 EN - 11/2018 43