Still 6219 Скачать руководство пользователя страница 371

Страница: 371 / 540

–

Push the coupling pin (1) down, turn the pin

by 90° and pull it out.

NOTE

Exceptions for the RX20-14C and RX20-16C:

Turn the coupling pin (1) by 90° and pull it out.

–

Adjust the height of the tiller.

DANGER

People can become trapped between the truck and

the trailer.
When coupling, ensure that there are no persons

present between the truck and the trailer.

–

Slowly move the truck backwards.

–

By moving the truck backwards, introduce

the tiller into the recess (2) in the counter-

weight.

DANGER

Risk of accident due to damaged or lost coupling

components!
If the coupling pin or securing bush is lost or dam-

aged during towing, the trailer will become loose and

uncontrollable.

–

Only use original coupling pins that have been

checked.

–

Ensure that the coupling pin is correctly inserted

and secured.

–

Insert the coupling pin into the counter-

weight, press downwards against the spring

pressure and turn it by 90°.

The coupling pin is now locked in this position.

NOTE

Exceptions for the RX20-14C and RX20-16C:

Insert the coupling pin into the counter-

weight (1) and turn it by 90°.

–

Remove any items used to prevent the trail-

er from rolling away.

Uncoupling the trailer

–

Take measures to prevent the trailer from

rolling away, e.g. using wedges.



Operation

Trailer operation

355

56368011531 EN - 01/2021 - 05

Содержание 6219





























































































































































































































































































































































































































































































































































Результаты поиска

Содержание 6219

Отзывы:

Похожие инструкции для 6219

Бренды по названию

Популярные бренды

Still 6219, Оригинальное руководство пользователя

Результаты поиска

Содержание 6219

Отзывы:

Похожие инструкции для 6219

Бренды по названию

Популярные бренды