Still 6219 Скачать руководство пользователя страница 315

Страница: 315 / 540

used, such as mirrors, a camera, a monitor

system etc.

–

Observe the following warning notices.

DANGER

Risk of fatal injury from falling load!
If attachments that hold the load by clamping it or ex-

erting pressure on it do not have a second method of

operating the function (lock), the load can work loose

and fall off.

–

Ensure that the second method of operating the

function (lock) is available.

–

When retrofitting such attachments, a second

method of operating the function (lock) must also

be retrofitted.

DANGER

Risk of fatal injury from falling load!
When installing a clamp with an integrated sideshift

function, ensure that the clamp does not open when

the sideshift is actuated.

–

Notify your authorised service centre before instal-

lation.

–

Never grab or climb on moving parts of the truck.

WARNING

Risk of accident due to incorrect labelling!
The use of attachments can cause accidents if the

labelling is incorrect or missing.
If the truck is not fitted with an attachment-specific

residual load capacity rating plate, and the operating

devices are not marked with the relevant pictograms,

the truck must not be used.

–

Use only CE-certified attachments that include op-

erating instructions and the required labels.

–

Arrange for an attachment-specific residual load

capacity rating plate to be fitted to the truck.

–

Arrange for the operating devices to be re-label-

led.

–

Arrange for the authorised service centre to adjust

the hydraulic system to the requirements of the at-

tachment (e.g. adjust the pump motor speed).

NOTE

If the required labelling is not provided with the

attachment, contact the authorised service

centre promptly.

Operation

Attachments

299

56368011531 EN - 01/2021 - 05

Содержание 6219





























































































































































































































































































































































































































































































































































Результаты поиска

Содержание 6219

Отзывы:

Похожие инструкции для 6219

Бренды по названию

Популярные бренды

Still 6219, Оригинальное руководство пользователя

Результаты поиска

Содержание 6219

Отзывы:

Похожие инструкции для 6219

Бренды по названию

Популярные бренды