Still 6219, Оригинальное руководство пользователя

Страница: 319 / 540

WARNING
Use of attachments can give rise to additional haz-
ards such as a change in the centre of gravity, addi-
tional danger areas etc.
Attachments must only be deployed for their inten-
ded use as described in the relevant operating in-
structions. Drivers must be taught how to operate the
attachments.
Loads may only be picked up and transported with
attachments if the loads are securely grasped and at-
tached. If necessary, the loads must also be secured
against slipping, rolling away, falling over, swinging
and tipping over. Note that any change to the loca-
tion of the load centre of gravity will affect the stabili-
ty of the truck.
–
Observe the capacity rating plate for the attach-
ments being used.
NOTE
Further variants and functions are available in
addition to the functions described below. The
directions of movement can be seen in the
pictograms on the operating devices. All the
attachments described fall into the category of
equipment variants. An exact description of
the respective movements or actions of the at-
tachment fitted can be found in the relevant
operating instructions.
With fleet manager access authorisation (var-
iant), the fleet manager can adjust the speed
of the auxiliary hydraulics for attachments.
–
See also the section entitled "Adjusting the
hydraulic speed for attachments" in this
chapter.
Attachment example for the con-
nection of the auxiliary hydraulics
NOTE
The authorised service centre will tell you
which attachments can be used with this truck.
The connection of attachments to the auxiliary
hydraulics is performed as per the diagram, as
highlighted in the operating instructions for the
attachment.
–
Observe the "Information on the auxiliary
hydraulics" in the "Technical data" chapter.
Operation
4
Attachments
303 56368011531 EN - 01/2021 - 05