Still 0301 Скачать руководство пользователя страница 51

Страница: 51 / 192

Fork lifting button (5)

●

Press the button (5) to lift the forks and

reach the maximum height.

●

Fork movement can be stopped at any time

by releasing the button (5). The forks will

stop in the position attained.

●

The fork lifting button (5) is active only when

the tiller is angled to the working position.

NOTE

The speed of the forks is proportional to how

hard the button (5) is pressed

Horn button (6)

●

Press the button (6) to operate the horn.

This device allows the driver to signal his

presence when necessary.

Anti-crush button (7)

●

Press the button (7) while the truck is travel-

ling towards the operator to automatically

reverse the direction of travel When revers-

ing, the truck travel speed is reduced for a

few seconds

The button (7) is a safety device. Particularly

useful in narrow areas, it prevents the opera-

tor from being crushed between a wall and the

tiller head.
The direction of travel of the truck will be re-

versed if the button (7) comes into contact

with the body of the operator. When the oper-

ator moves away and releases the button (7),

the truck stops.

NOTE

In "SF" trucks with a platform, the anti-crush

button (7) is usually disabled.

Slow-speed button (8) (optional — Creep

Speed)

●

The button (8) is fitted with the optional "till-

er always active" option (Creep Speed).

●

Keeping the button (8) pressed while turn-

ing the throttle (2 – 3) activates the slow

speed, regardless of the tiller position.

●

Keeping the button (8) pressed at the same

time as the fork lifting button (5) activates

fork lifting, regardless of the tiller position

Overview

Instruments and controls

45758043484 EN - 11/2021 - 08

Содержание 0301

































































































































































































Результаты поиска

Содержание 0301

Отзывы:

Похожие инструкции для 0301

Бренды по названию

Популярные бренды

Still 0301, Оригинальное руководство пользователя

Результаты поиска

Содержание 0301

Отзывы:

Похожие инструкции для 0301

Бренды по названию

Популярные бренды