Still 0301 Скачать руководство пользователя страница 113

Страница: 113 / 192

Moving the load

Safety guidelines for handling loads

WARNING

Closely observe the following instructions before

picking up loads. Never touch or stand on moving

parts of the truck (e.g. lifting devices, equipment or

devices for picking up loads).

WARNING

Risk of crushing hands and feet when using the lift.
When using the lift, keep hands and feet away from

moving parts.

DANGER

It is not permitted to go under the forks. It is not

permitted to transport or lift people on the forks.
If there are people under or on top of the forks, do

not move the truck. Do not move the forks and do not

drive the truck.

DANGER

Risk of accident when forks are changed:
If the forks are changed and a different type of forks

to the original forks is fitted, the residual load capaci-

ty changes.
When forks are changed, a new residual capacity

plate must be affixed.
If a truck is supplied without forks, the residual ca-

pacity plate for standard forks is affixed (see chapter

6 "Technical Data").

DANGER

Wear protective footwear. Always keep a suitable

distance between your feet and the truck.
Risk of crushing feet when manoeuvring the truck.

CAUTION

The transport of persons or passengers is strictly

prohibited.

CAUTION

Driving or turning with the forks raised above approx-

imately 300 mm from the ground is prohibited.
It is only allowed at reduced speed when depositing

a load and/or picking up a load from shelving.

–

1044_800-003

CAUTION

Pallet condition
Insert the forks into the pallets from the correct side,

i.e. the open side, as shown in the illustration (inser-

tion from all sides permitted only with the EXP mod-

el).
Ensure that the pallet is in good condition before

commencing any operation.

Use

Moving the load

103

45758043484 EN - 11/2021 - 08

Содержание 0301

































































































































































































Результаты поиска

Содержание 0301

Отзывы:

Похожие инструкции для 0301

Бренды по названию

Популярные бренды

Still 0301, Оригинальное руководство пользователя

Результаты поиска

Содержание 0301

Отзывы:

Похожие инструкции для 0301

Бренды по названию

Популярные бренды