Still 0301 Скачать руководство пользователя страница 25

Страница: 25 / 192

CAUTION

Passing over cracks or damaged parts of the floor

with the truck is prohibited. Dirt and any objects in

the work path must be removed immediately. The

employer must ensure that the flooring requirements

are met. For this reason, the manufacturer cannot be

held liable for any damage to the truck (especially to

wheels, hubs etc.) caused by use on unsuitable sur-

faces.

Battery connection cables

CAUTION

Using sockets with NON-ORIGINAL battery connec-

tion cables can be dangerous (see purchase referen-

ces in the parts catalogue)

Requirements for the traction-

battery charging area

When the traction battery is being charged,

the area must be sufficiently ventilated in or-

der to dilute or eliminate the gases produced

(in compliance with current national regula-

tions).

Safety Regulations Relative to Forklift Use

●

The operator must familiarize himself with

the forklift to be able to better describe any

defects and assist maintenance personnel.

The operator, trained and authorized to use

the forklift, must be familiar with the controls

and performances of the forklift.

●

Any defect (squeaking, leaks, etc.) must be

promptly reported because, if neglected, it

could cause more serious failures/defects.

●

Carry out the inspections indicated in the

chapter on "Daily Inspections".

ENVIRONMENT NOTE

Report any oil and/or battery fluid leaks: they

are dangerous and highly polluting.

CAUTION

If you notice a burning smell, stop the forklift and turn

off the engine, then disconnect the battery.

Safety

Safety guidelines

45758043484 EN - 11/2021 - 08

Содержание 0301

































































































































































































Результаты поиска

Содержание 0301

Отзывы:

Похожие инструкции для 0301

Бренды по названию

Популярные бренды

Still 0301, Оригинальное руководство пользователя

Результаты поиска

Содержание 0301

Отзывы:

Похожие инструкции для 0301

Бренды по названию

Популярные бренды