Stihl SP 92 T, Инструкция по эксплуатации

Страница: 11 / 32

SP 92 TC
English
9
Mounting the Gearbox
N
Place the power tool on the ground
so that it rests on the machine
support (arrow).
N
Loosen the clamp screws (1) on the
gearbox – do not remove them.
N
Pull the protective cap off the end of
the drive tube.
The plug may come out of the drive tube
when you pull off the cap. Push it back
into the drive tube as far as stop.
N
Apply a mark (with pencil or colored
pen) at distance A (40 mm) from the
end of the drive tube.
N
Push the gearbox (2) onto the drive
tube (3) as far as stop – turn it back
and forth at the same time – until it
reaches or covers the mark on the
drive tube.
Alternative check: The drive tube is
correctly positioned when it completely
closes the slot in the gearbox’s clamp
(short arrows).
N
Line up the gearbox parallel to the
machine support or the ground.
N
Tighten down the clamp screws on
the gearbox firmly.
Assembling the Unit
414BA006 KN
1
414BA007 KN
1
413BA014 KN
002BA248 KN
413BA015 KN
A
414BA008 KN
2 3
414BA009 KN