1.5 bar (21.75 PSI) 0.49 l/min (29.9 cu.in/min)
2.0 bar (29.0 PSI)
0.56 l/min (34.2 cu.in/min)
3.0 bar (43.5 PSI)
0.69 l/min (42.1 cu.in/min)
13.2
Specifications
Working pressure, max.:
3 bar
(43,5 PSI)
Flow volume, max.:
1.0 l/min
(61 cu. in./min)
Solution capacity, max.:
3 l
(0.8 US gals)
Total capacity:
4.2 l
(1.1 US gals)
Operating temperature, max.: 30°C
(86°F)
Residual solution in tank:
<0.04 l
(1.4 fl.oz)
Recoil force:
<5 N
(1.1 lbf)
Dry weight:
1.2 kg
(2.6 lbs)
14 Troubleshooting
Before starting any service work, operate the sprayer until it is no longer under pressure – if pressure
is not released, chemical may escape unexpectedly when working on the sprayer.
After servicing, carry out test run with clean water.
Condition
Cause
Remedy
Pumping action produces no
pressure
Pump not tightened down properly Lock the pump handle and
tighten down the pump
O-ring on pump damaged
Install new O-ring
Piston cup seal damaged
Install new piston cup seal
Jet only – spray not atomized Spinner insert in nozzle missing
Fit spinner insert in the nozzle
Nozzle does not spray – pres‐
sure in tank OK
Nozzle / spinner insert and/or filter
blocked
Clean nozzle / spinner insert
and/or filter
Liquid entering the pump
Valve disk dirty or damaged
Clean or replace valve disk
Piston manometer indicates
no tank pressure; relief valve
operates too soon
Piston manometer faulty
Replace the sprayer.
15 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
When repairing the machine, only use replace‐
ment parts which have been approved by STIHL
for this power tool or are technically identical.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of original STIHL
replacement parts.
Original STIHL parts can be identified by the
STIHL part number, the
{
logo and the
STIHL parts symbol
K
(the symbol may appear
alone on small parts).
16 Disposal
Contact the local authorities or your STIHL serv‐
icing dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
000BA073 KN
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
17 EC Declaration of Con‐
formity
ANDREAS STIHL AG & Co. KG
Badstr. 115
English
14 Troubleshooting
12
0458-583-0121-B
