Stihl RE 232, Инструкция по эксплуатации

Страница: 8 / 40

RE 232, RE 272 PLUS, RE 282 PLUS
English
6
–
High-pressure hose and
spray attachment in good
condition (clean, moving
easily) and correctly
assembled
–
For good control of the
machine, the handles
should be clean and dry
with no oil or dirt on them
–
Check oil level
–
Never attempt to modify
the controls or safety
devices in any way
–
Set up the machine so that
it cannot slip or tip over.
Only operate the machine
on a stable and level
ground
Electrical connection
WARNING
Minimize the risk of electrical
shock:
–
Voltage and frequency of
the machine (see rating
plate) must match the
voltage and frequency of
the mains supply
–
Examine the connecting
cord, power plug and
extension cord for
damage. Do not use the
machine with a damaged
connecting cord, extension
cord or damaged power
plug
–
Only connect the machine
to a correctly installed
power socket
–
The insulation on the
connecting cord and any
extension cord, the plug
and the coupling must be
fully intact
–
Never touch the power
plug, connecting cord and
extension cord, and
electrical plug connections
with wet hands
WARNING
Route the connecting cord
and extension cord properly:
–
Observe the minimum
cross-section of the
individual cords – see
"Connecting the machine
to the power supply"
–
Route and mark the power
cord so that it cannot
become damaged and no
one is endangered – risk of
stumbling!
–
Use of unsuitable
extension cords can be
dangerous. Use only
extension cords that are
approved for outdoor use
and are correspondingly
marked and have a
sufficient cross-section
–
The connector and
coupling of the extension
cord must be waterproof
and must not lie in water
–
It is advisable to keep the
plug connection at least
60 mm above the
ground/floor, e. g. by using
a cable reel
–
Don't let the cord rub
against edges or pointed
or sharp objects