Stihl RE 232, Инструкция по эксплуатации

Страница: 16 / 40

RE 232, RE 272 PLUS, RE 282 PLUS
English
14
Connection to the power supply socket
Before connection to the power supply,
check that the machine is switched off –
see "Switching off the machine"
N
Remove the power plug from the
upper holder (1)
N
Swivel the lower holder (2) upward
and remove the power cord
N
Plug the power cord or extension
cord into a properly installed outlet
N
Turn on water supply
NOTICE
The machine may only be switched on
when the water intake hose is connected
and the water supply has been turned
on. Otherwise the machine may be
damaged due to lack of water.
N
Completely unroll the high-pressure
hose
N
Turn the master switch to I – now
the machine is in standby mode
N
Point the spray gun at the object to
be cleaned – never at persons!
When the machine is switched on,
voltage fluctuations that occur under
unfavorable mains conditions (high
power line impedance) may negatively
affect other connected electrical
appliances.
Trouble is not anticipated at power line
impedances less than 0.15 ohms.
Machine with hose reel
NOTICE
Always completely unroll the high-
pressure hose from the hose reel. The
high water pressure causes the high-
pressure hose to expand. This can also
damage the hose reel or high-pressure
hose.
N
Pull out hose reel stop (1)
N
Completely unroll the high-pressure
hose
20 m to 50 m 4 mm
2
230 V – 240 V / 1~:
up to 20 m
2.5 mm
2
20 m to 50 m 4 mm
2
200 V / 3~:
up to 10 m
3.5 mm
2
10 m to 30 m 5.5 mm
2
1
6158BA007 KN
2
Switching On
1607BA01
1 KN
1
6158BA020 KN