Stihl RE 232, Инструкция по эксплуатации

Страница: 14 / 40

RE 232, RE 272 PLUS, RE 282 PLUS
English
12
High-pressure hose and spray gun
Fitting
N
Push the high-pressure hose (1)
onto the connector (2)
N
Fit and attach the union nut (3) and
tighten it by hand
Removing
N
Push the coupling (4) in the
direction of the arrow and hold it
N
Loosen the union nut (3) and
unscrew it from the connector in the
direction of the arrow
High-pressure hose extension
Always use only one high-pressure hose
extension (special accessory).
N
Connect the high-pressure hose
extension between the high-
pressure hose and spray gun.
N
Connecting the water hose
Briefly rinse out the water hose before
connecting it to the machine to prevent
sand and other particles from entering
the machine and to purge the air from
the water hose.
N
Push the coupling (1) on to the hose
connector (2)
N
Turn on water supply
To vent the system:
N
Actuate the spray gun (without
spray lance mounted) until a
uniform water jet emerges
Connection to the drinking water main
When hooking up to the drinking water
main, a backflow preventer must be
installed between the water tap and the
hose. The design of the backflow
preventer must comply with the
applicable country-specific regulations.
If drinking water has passed through the
backflow preventer, it can no longer be
regarded as drinking water.
Follow the rules laid down by the local
water supply company to prevent water
flowing back from the high-pressure
cleaner into the drinking water main.
1
2
3
647BA022 KN
647BA023 KN
3
4
Connecting the water supply
Diameter of water
hose: 3/4"
Length of water hose: min. 10 m (to
absorb pres -
sure surges)
max. 25 m
2
1
2
RE 232
6158BA006 KN
RE 282
1
RE 272
003BA003 KN