manualshive.com logo in svg

Stihl KombiTool KombiSystem SP-KM, Инструкция по эксплуатации

Поделиться
Скачать
Stihl KombiTool KombiSystem SP-KM Скачать руководство пользователя страница 8

6.1

Mounting the Gearhead

1

414BA007 KN

1

► Loosen the clamp screws (1) on the gearhead

– do not remove them.

413BA015 KN

A

► Apply a mark (with pencil or crayon) at dis‐

tance A (50 mm) from the end of the drive

tube.

414BA008 KN

2

3

► Push the gearhead (2) onto the drive tube (3)

– turn it back and forth at the same time – until

it reaches or covers the mark on the drive

tube.

Alternative check: The drive tube is correctly

positioned when it completely closes the slot in

the gearhead’s clamp (short arrows).

4

417BA001 KN

► Line up the center of the gearhead with the

lug (4) on the drive tube – the STIHL logo fac‐

ing up.

► Tighten down the clamp screws on the gear‐

head firmly.

6.2

Fitting the Tines

414BA025 KN

1

2

► Screw the tines (1) by hand into the two

rakes (2) as far as stop – fit all eight tines on

the rakes.

► Tighten down the tines by hand.

English

6 Assembling the Unit

8

0458-417-0121-B

Содержание KombiTool KombiSystem SP-KM

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды