manualshive.com logo in svg

Stihl KombiTool KombiSystem SP-KM, Инструкция по эксплуатации

Поделиться
Скачать
Stihl KombiTool KombiSystem SP-KM Скачать руководство пользователя страница 7

► While combing the branches, turn the rakes to

and fro around the shaft's axis (C) if neces‐

sary.

► Have the whole tree even if there is very little

fruit left on it.

► Do not hold the unit in one spot for too long so

as not to damage leaves and branches unnec‐

essarily.

► Always shut off the engine before leaving the

unit unattended.

414BA005 KN

1

NOTICE

Operating the unit with broken and/or missing

tines (1) may result in damage to gearbox com‐

ponents or overload them. Therefore, do not con‐

tinue using a unit with broken and/or missing

tines.

Operating the unit with broken and/or missing

tines reduces the unit's harvesting performance.

► Always replace damaged tines – see chapter

on "Inspection and Maintenance by User".

5

Approved KombiEngines

Only use KombiEngines supplied or explicitly

approved by STIHL for use with the attachment.
This KombiTool may be operated only in combi‐

nation with the following KombiEngines:

STIHL KM 55 R, KM 56 R, KM 85 R

1)

, KM 90 R,

KM 94 R, KM 100 R, KM 110 R

1)

, KMA 130 R,

KMA 135 R

WARNING

Loop-handled machines must be equipped with

a barrier bar.

6

Assembling the Unit

470BA006 KN

► Use the drive tube supplied with the unit.

► Pull the protective caps off the ends of the

shaft and keep them in a safe place for later

use – see "Storing the Machine"

002BA248 KN

The plug may come out of the drive tube when

you pull off the cap. Push it back into the shaft as

far as it will go.

1) 

Only outside EU

5 Approved KombiEngines

English

0458-417-0121-B

7

Содержание KombiTool KombiSystem SP-KM

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды