STIHL or are technically identical. If you have
any questions about this, consult your dealer.
Use only high-quality parts and accessories. in
order to avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of genuine STIHL
tools and accessories. They are specifically
designed to match the product and meet your
performance requirements.
Never attempt to modify your power tool in any
way since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
Do not use a high-pressure washer to clean the
power tool. The solid jet of water may damage
parts of the unit.
3.1
Clothing and equipment
Wear proper protective clothing and equipment.
Clothing must be sturdy but allow
complete freedom of movement.
Wear close-fitting clothes such as a
boiler suit or coverall, not a loose
jacket.
Do not wear clothing which could become trap‐
ped in wood, brush or moving parts of the
machine. Do not wear a scarf, necktie or jewelry.
Tie up and confine long hair above your should‐
ers.
Wear sturdy shoes with non-slip
soles.
WARNING
To reduce the risk of eye injuries,
wear close-fitting safety glasses in
accordance with European Standard
EN 166. Make sure the safety
glasses are a snug fit.
Wear face protection and make sure it is a good
fit. Face protection alone is not sufficient to pro‐
tect the eyes.
Wear "personal" sound protection, e.g. ear
defenders.
Wear a safety hard hat where there is a danger
of head injuries from falling objects.
Wear sturdy protective gloves made
of a resistant material (e. g. leather).
STIHL can supply a comprehensive range of per‐
sonal protective equipment.
3.2
Transporting the machine
002BA328 KN
Always stop the engine.
Carry the machine hanging from the shoulder
strap or properly balanced by the drive tube –
tines pointing to the rear.
Do not touch hot parts of the machine – risk of
burn injury!
By vehicle: When transporting in a vehicle, prop‐
erly secure your machine to prevent turnover,
damage and fuel spillage.
3.3
Before starting
Check that your power tool is properly assem‐
bled and in good condition – refer to appropriate
chapters in the KombiEngine and KombiTool
instruction manuals.
–
Rake tines: Correctly and securely mounted
and in good condition (clean, not warped or
cracked).
–
Do not make any changes to the controls or
the safety devices.
–
Keep the handles dry and clean – free from oil
and dirt – this is important for safe control of
the machine
–
Adjust the harness to suit your height and
reach. Observe the chapter "Fitting the Har‐
ness"
To reduce the risk of personal injury, do not
operate your power tool if it is damaged or not
properly assembled!
To prepare for emergencies when using a har‐
ness: Practice setting down the machine quickly.
To avoid damage, do not throw the unit to the
ground when practicing.
3 Safety Precautions and Working Techniques
English
0458-417-0121-B
3
