Stihl KombiTool KombiSystem SP-KM Скачать руководство пользователя страница 4

3.4

Holding and guiding the

machine

Make sure you always have a firm and secure

footing.

002BA057 KN

Always hold the unit firmly with both hands on

the handles.
Right hand on control handle, left hand on loop

handle, even if you are left-handed. Wrap your

fingers and thumbs around the handles.

552BA003 KN

The machine can be carried on a harness that

bears the weight of the machine.

3.5

While working

In the event of impending danger or in an emer‐

gency, switch off the engine immediately by mov‐

ing the slide control / stop switch / stop button to

STOP or 0.

This power tool is not insulated. Keep

at least 15 m away from electric

power lines – Danger of fatal electric

shock!

5m (17ft)

15m (50ft)

To reduce the risk of injury from falling objects,

do not allow bystanders within a radius of 15

meters of your own position. This distance must

also be maintained in relation to objects (vehi‐

cles, window panes) – risk of property damage!
Maintain a minimum clearance of 15 m between

the tips of the rakes and electric power lines.

Electric current may also arc over from high-volt‐

age cables at a greater distance. Have the power

switched off before starting work in the immedi‐

ate vicinity of power lines.
The correct engine idle speed is important to

ensure that the attachment stops moving when

you let go of the throttle trigger. Check and cor‐

rect the idle speed setting at regular intervals. If

the attachment continues running when the

engine is idling, have it repaired by your dealer –

see KombiEngine user manual.
Note that the rakes and tines continue to run for

a short period after you let go of the throttle trig‐

ger – flywheel effect!

The gear head becomes hot during

operation. Do not touch the gear

housing – risk of burns!

Take special care in wet conditions, on slopes,

uneven ground, etc. - Risk of slipping!
Watch out for obstacles: tree stumps, roots – risk

of tripping or stumbling!
Clear away fallen branches and scrub from the

work area.
Keep the rakes and tines clear of foreign objects

– such objects may be caught and thrown and

damage the rakes and tines.

English

3 Safety Precautions and Working Techniques

4

0458-417-0121-B

Содержание KombiTool KombiSystem SP-KM

















Отзывы: