manualshive.com logo in svg

Stihl KA 120, Инструкция по эксплуатации

Поделиться
Скачать
Stihl KA 120 Скачать руководство пользователя страница 7

Do not turn the engine over on the starter with

the spark plug boot or spark plug removed

unless the slide control / stop switch is on STOP

or 0 since there is otherwise a risk of fire from

uncontained sparking.
To reduce the risk of fire, do not service or store

your machine near open flames.
Check the fuel filler cap for leaks at regular inter‐

vals.
Use only a spark plug of the type approved by

STIHL and make sure it is in good condition –

see "Specifications".
Inspect the ignition lead (insulation in good con‐

dition, secure connection).
Check the condition of the muffler.
To reduce the risk of fire and damage to hearing,

do not operate your machine if the muffler is

damaged or missing.
Do not touch a hot muffler since burn injury will

result.
Vibration behavior is influenced by the condition

of the AV elements – check the AV elements at

regular intervals.

4

Approved Power Tool

Attachments

The following STIHL attachments may be moun‐

ted to the basic power tool:

FS

(B)

FS

(A)

BF

228BA071 KN

Interchangeable

Attachment

Application

FS (A) 

1)

Brushcutter with mowing

head

FS (B) 

1)

 

2)

Brushcutter with metal

cutting attachment

BF

Cultivator with pick tines

5

Mounting the Bike Handle

5.1

Mounting Bike Handle with

Swiveling Handle Support

The machine is supplied with the swiveling han‐

dle support already mounted on the shaft. To

mount the handlebar it is necessary to remove

the clamp moldings.
5.1.1

Removing the Clamp Moldings

► Hold the lower clamp (1) and upper clamp (2)

firmly together.

► Release the wing screw (3) – the clamps are

loose once the wing screw has been released.

They are pushed apart by the two

springs (4 and 5).

► Pull out the wing screw – the washer (6)

remains on the wing screw.

► Separate the clamp moldings – the

springs (4 and 5) remain in the lower clamp.

1)

Use shoulder strap

2)

Barrier bar required on loop handle

4 Approved Power Tool Attachments

English

0458-516-0121-B

7

Содержание KA 120

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды