manualshive.com logo in svg

Stihl KA 120, Инструкция по эксплуатации

Поделиться
Скачать
Stihl KA 120 Скачать руководство пользователя страница 17

16 Replacing the Starter Rope

and Rewind Spring

16.1

Removing the Fan Housing

1

1

1

1

256BA075 KN

► Take out the screws (1).

► Remove the fan housing.

16.2

Replacing the Starter Rope

3

2

4

256BA032 KN

► Remove the spring clip (2).

► Carefully remove the rope rotor with

washer (3) and pawl (4).

WARNING

The rewind spring may pop out and uncoil during

this operation – take care to avoid the risk of

injury.

6

5

256BA033 KN

► Pry the cap (5) out of the grip.

► Remove the remaining rope from the rotor and

starter grip.

► Tie a simple overhand knot in the new rope

and then thread it through the top of the grip

and the rope bushing (6).

► Refit the cap in the grip.

256BA034 KN

► Thread the rope through the rotor and secure

it with a simple overhand knot.

► Coat the rope rotor bearing bore with non-res‐

inous oil.

► Slip the rotor over the starter post – turn it

back and forth to engage the anchor loop of

the rewind spring.

16 Replacing the Starter Rope and Rewind Spring

English

0458-516-0121-B

17

Содержание KA 120

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды