Stihl KA 120 Скачать руководство пользователя страница 11

Страница: 11 / 24

engine oil in accordance with JASO FB, JASO

FC, JASO FD, ISO-L-EGB, ISO-L-EGC or ISO-L-

EGD.
STIHL specifies STIHL HP Ultra two-stroke

engine oil or an equivalent high-performance

engine oil in order to maintain emission limits

over the machine’s service life.
8.2.3

Mix Ratio

STIHL 50:1 two-stroke engine oil: 50 parts gaso‐

line to 1 part oil
8.2.4

Examples

Gasoline

STIHL engine oil 50:1

Liters

(ml)

0.02

(20)

0.10

(100)

0.20

(200)

0.30

(300)

0.40

(400)

0.50

(500)

► Use a canister approved for storing fuel. Pour

oil into canister first, then add gasoline and

mix thoroughly.

8.3

Storing Fuel

Store fuel only in approved safety-type fuel can‐

isters in a dry, cool and safe location protected

from light and the sun.
Fuel mix ages – only mix sufficient fuel for a few

weeks work. Do not store fuel mix for longer than

30 days. Exposure to light, the sun, low or high

temperatures can quickly make the fuel mix

unusable.
STIHL MotoMix may be stored for up to 2 years

without any problems.

► Thoroughly shake the mixture in the canister

before fueling your machine.

WARNING

Pressure may build up in the canister – open it

carefully.
► Clean the fuel tank and canister from time to

time.

Dispose of remaining fuel and cleaning fluid

properly in accordance with local regulations and

environmental requirements.

Fueling

9.1

Preparations

256BA060 KN

► Before fueling, clean the filler cap and the area

around it to ensure that no dirt falls into the

tank.

► Position the machine so that the filler cap is

facing up.

9.2

Filling Up with Fuel

Take care not to spill fuel while fueling and do

not overfill the tank. STIHL recommends you use

the STIHL filler nozzle for fuel (special acces‐

sory).

► Open the filler cap.

► Fill up with fuel.

► Close the filler cap.

9 Fueling

English

0458-516-0121-B

Содержание KA 120

























Результаты поиска

Содержание KA 120

Отзывы:

Бренды по названию

Популярные бренды

Stihl KA 120, Инструкция по эксплуатации

Результаты поиска

Содержание KA 120

Отзывы:

Бренды по названию

Популярные бренды