Stihl KA 120 Скачать руководство пользователя страница 10

Страница: 10 / 24

002BA163 KN

► Use a suitable tool to push the slide to the end

of the slot (see illustration).

STOP

249BA017 KN

► Press down the throttle trigger lockout (1) and

squeeze the throttle trigger (2) (full throttle) –

this sets the throttle cable correctly.

Fitting the Carrying Ring

The carrying ring comes standard with the

machine or is available as a special accessory.

002BA142 KN

For position of carrying ring see "Main Parts".

► Place the clamp (1) against the drive tube with

the tapped hole on the left (viewed from

engine).

► Squeeze the two ends of the clamp together

and hold in that position.

► Insert the M6x14 screw (2).

► Line up the carrying ring.

► Tighten down the screw firmly.

Fuel

Your engine requires a mixture of gasoline and

engine oil.

WARNING

For health reasons, avoid direct skin contact with

gasoline and avoid inhaling gasoline vapor.

8.1

STIHL MotoMix

STIHL recommends the use of STIHL MotoMix.

This ready-to-use fuel mix contains no benzol or

lead, has a high octane rating and ensures that

you always use the right mix ratio.
STIHL MotoMix uses STIHL HP Ultra two-stroke

engine oil for an extra long engine life.
MotoMix is not available in all markets.

8.2

Mixing Fuel

NOTICE

Unsuitable fuels or lubricants or mix ratios other

than those specified may result in serious dam‐

age to the engine. Poor quality gasoline or

engine oil may damage the engine, sealing rings,

hoses and the fuel tank.

8.2.1

Gasoline

Use only high-quality brand-name gasoline with

a minimum octane rating of 90 – leaded or unlea‐

ded.
Gasoline with an ethanol content of more than

10% can cause running problems in engines with

a manually adjustable carburetor and should not

be used in such engines.
Engines equipped with M-Tronic deliver full

power when run on gasoline with an ethanol con‐

tent of up to 25% (E25).
8.2.2

Engine Oil

If you mix the fuel yourself, use only STIHL two-

stroke engine oil or another high-performance

English

7 Fitting the Carrying Ring

0458-516-0121-B

Содержание KA 120

























Результаты поиска

Содержание KA 120

Отзывы:

Бренды по названию

Популярные бренды

Stihl KA 120, Инструкция по эксплуатации

Результаты поиска

Содержание KA 120

Отзывы:

Бренды по названию

Популярные бренды