FS 38
English
30
N
Hold the mowing head steady.
N
Rotate the spool counterclockwise
until the shortest line is about 10 cm
(4 in).
N
If necessary, cut the longer line to a
length of about 10 cm (4 in).
The mowing head is now full.
STIHL AutoCut 5
-
2
Removing remaining nylon line
N
Open the mowing head – hold it
steady with one hand and turn the
cap (1) counterclockwise.
N
Disengage the spool (2), take it out
of the mowing head and remove the
remaining line.
Winding line onto spool
A prewound spool (special accessory)
may be used as an alternative to the
following procedure.
N
Use green-coded nylon line with a
diameter of 2.0 mm (0.08 in).
N
Cut two 3 m (9ft 9in) lengths of
nylon line from the reel (special
accessory).
N
Insert the ends of each line (3) in the
holes (4) in the spool.
N
Bend the ends of the lines over the
edge of the holes to form a hook.
681BA024 KN
Schnur/LINE 2
Schnur/LINE 1
681BA008 KN
1
2
681BA009 KN
4
3
3
