FS 38
English
18
N
Slip the mowing head (2) over the
shaft (5) and engage hex recess (7)
on the external hexagon (6).
N
Fit the cap (8) on the mowing head
– screw it clockwise on to the shaft
as far as stop and tighten it down
firmly.
STIHL AutoCut C 5-2
N
Slip the mowing head (2) on to the
shaft – as AutoCut 5-2.
N
Turn the spool (9) clockwise until
the two arrow heads line up –
secure the spool in this position.
N
Insert the cap (8) in the spool, press
it down as far as stop and turn it
clockwise at the same time.
N
Turn the cap until you feel
resistance and then tighten it down
firmly by hand.
STIHL PolyCut 6-3
N
Fit the thrust plate on the shaft.
N
Insert the nut (10) in the mowing
head.
N
Screw the mowing head (11)
clockwise on to the shaft (5) as far
as stop.
N
Block the shaft.
N
Tighten down the mowing head
firmly.
WARNING
If the mounting nut has become too
loose, fit a new one.
NOTICE
Remove the tool used to block the shaft.
7
5
2
232BA053 KN
6
8
9
681BA018 KN
Schnur/LINE 2
Schnur/LINE 1
2
8
11
5
681BA019 KN
10
