23
FS 100 RX
English / USA
:
Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length – it might otherwise break.
:
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
:
Crank engine until it begins to fire.
After no more than
five attempts
,
turn the choke knob to
e
:
continue cranking.
When the engine begins to fire:
:
Blip the throttle trigger so that the
slide control moves to the normal
run position
#
and the engine settles
down to idle speed.
Make sure the carburetor is
correctly adjusted – the cutting tool
must not rotate when the engine is
idling.
Your machine is now ready for
operation.
Stopping the engine
:
Move the slide control in direction of
arrow (
h
) to
STOP
-
O
.
At very low outside temperatures
As soon as engine runs:
:
Blip the throttle trigger to disengage
the starting throttle position. The
slide control moves to the normal
run position
#
and the engine settles down to idle
speed.
:
Open the throttle slightly.
:
Warm up engine for brief period.
If the engine does not start
Choke knob
If you did not turn the choke knob to
e
quickly enough after the engine began to
fire, the combustion chamber has
flooded.
:
Turn choke knob to
e
:
Select starting throttle position.
:
Start the engine by pulling the
starter rope firmly. 10 to 20 pulls
may be necessary.
If the engine still does not start:
:
Move the slide control to
STOP
-
O
.
:
Pull off the spark plug boot (
10
).
10
249BA008 KN
Содержание FS 100 RX
Страница 45: ...44 English USA FS 100 RX ...
Страница 89: ...88 español EE UU FS 100 RX ...
