Stihl FR 235, Инструкция по эксплуатации

Страница: 17 / 24

11.2 Holding and Controlling the
Trimmer
0000-GXX-8177-A0
► Carry the trimmer on your back.
► Hold the trimmer firmly with your right hand on
the control handle – wrap your thumb around
the handle.
► Hold the trimmer with your left hand on the
loop handle – wrap your thumb around the
loop handle.
11.3 Mowing
The cutting height is determined by the distance
of the cutting attachment from the ground.
A B
0000-GXX-8181-A0
► Swing the trimmer back and forth in an arc (A).
If you are using a metal cutting attachment:
Mow with the left-hand side on the metal cut‐
ting attachment (B).
► Walk slowly and steadily forwards.
11.4 Adjusting Nylon Line
11.4.1 Line Feed on AutoCut Mowing Head
► Tap the rotating mowing head on the ground.
About 30 mm of fresh nylon line is advanced.
The line limiting blade in the deflector trims the
mowing lines to the correct length.
1 2
0000-GXX-4037-A1
Automatic feed does not operate if the mowing
lines are shorter than 25 mm.
► Shut off the engine.
► Depress the spool (1) on the mowing head
and hold it depressed.
► Pull out the mowing lines (2).
► If the mowing lines (2) cannot be pulled out to
the required length: Replace the spool (1) or
the mowing lines (2).
The spool is empty.
11.4.2 Line Feed on SuperCut Mowing
Heads
Mowing lines are adjusted automatically. The line
limiting blade in the deflector trims the mowing
lines to the correct length.
Automatic feed will not take place if the mowing
lines are shorter than 40 mm.
► Shut off the engine.
► Pull out the mowing lines.
► If the mowing lines cannot be pulled out to
required length: Replace nylon line.
The spool is empty.
12 After Finishing Work
12.1 When Work is Finished
► Shut off the engine.
► Allow trimmer to cool down.
► If the brushcutter is wet: Allow the brushcutter
to dry.
► Clean the brushcutter.
► Clean the deflector.
► Clean the cutting attachment.
► If a metal cutting attachment is mounted: Fit
the matching transport guard.
13 Transporting
13.1 Transporting the brushcutter
► Shut off the engine.
► If a metal cutting attachment is mounted: Fit
the matching transport guard.
Carrying the trimmer
► Carry the trimmer on your back.
► Hold the trimmer with your right hand on the
control handle.
► Hold the trimmer with your left hand on the
loop handle.
Transporting the trimmer in the car
► Secure the trimmer to prevent turnover and
movement.
12 After Finishing Work English
0458-527-0121-B 17