Stihl FR 230 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 36

Stihl FR 230 Скачать руководство пользователя страница 26

0458-735-0121-A

24

English

13 After Finishing Work

► If the mowing lines (2) cannot be pulled out to the required

length: Replace the spool (1) or the mowing lines (2).

The spool is empty.

13.1 After Finishing Work

► Shut off the engine.
► Allow trimmer to cool down.
► If the trimmer is wet: Allow the trimmer to dry.
► Clean the trimmer.
► Clean the air filter.
► Clean the deflector.
► Clean the cutting attachment.
► If a metal cutting attachment is mounted: Fit the matching

transport guard.

14.1 Transporting the Trimmer

► Shut off the engine.
► If a metal cutting attachment is mounted: Fit the matching

transport guard.

► Carry the trimmer on your back.
► Hold the trimmer with your right hand on the control

handle.

► Hold the trimmer with your left hand on the loop handle.
► Transporting the trimmer in a vehicle: Secure the trimmer

to prevent turnover and movement.

15.1 Storing the Trimmer

► Shut off the engine.
► If a metal cutting attachment is mounted: Fit the matching

transport guard.

► Observe the following points when storing the trimmer:

– The trimmer is out of the reach of children.
– The trimmer is clean and dry.

If you store the trimmer for more than 3 months:

► Remove the cutting attachment.
► Open the fuel tank cap.
► Drain the fuel tank.
► Close the fuel tank.
► Have fuel tank cleaned by a STIHL servicing dealer.
► Start the engine and run it at idling speed until it stops.

16.1 Cleaning the Trimmer

► Shut off the engine.
► Allow trimmer to cool down.
► Clean the trimmer with a damp cloth or STIHL resin

solvent.

► Clean cooling air slots with a soft brush.

16.2 Cleaning the Deflector and Cutting Attachment

► Shut off the engine.
► Clean the deflector and cutting attachment with a damp

cloth or a soft brush.

13 After Finishing Work

14 Transporting

15 Storing

16 Cleaning

«
...
24
25
26
27
28
...
»

Содержание FR 230





































Отзывы:

Нет отзывов