Stihl FR 230 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 36

Stihl FR 230 Скачать руководство пользователя страница 21

0458-735-0121-A

19

English

9 Mixing Fuel and Refueling the Brushcutter

STIHL recommends you use STIHL MotoMix.
If you mix the fuel yourself, use only STIHL two-stroke

engine oil or another high-performance engine oil in

accordance with JASO FB, JASO FC, JASO FD, ISO-L-

EGB, ISO-L-EGC or ISO-L-EGD.
STIHL specifies STIHL HP Ultra two-stroke engine oil or an

equivalent high-performance engine oil in order to maintain

emission limits over the machine’s service life.
► Make sure that the octane number of the gasoline is at

least 90 RON and the ethanol content is not more than

10%.

► Make sure the two-stroke engine oil you are using is

suitable for trimmers.

► Depending on the required amount of fuel, determine the

correct amounts of two-stroke engine oil and gasoline in a

mix ratio of 50:1. Examples for fuel mixes:
– 1 liter gasoline, 20 ml two-stroke engine oil
– 3 liters gasoline, 60 ml two-stroke engine oil
– 5 liters gasoline, 100 ml two-stroke engine oil

► Pour two-stroke engine oil into a clean approved fuel

canister first and then add gasoline.

► Thoroughly mix the fuel.

9.2 Fueling the Trimmer

► Shut off the engine.
► Place your trimmer on a level surface so that the fuel tank

cap faces up.

► Use a damp cloth to clean the tank cap and the area

around it.

► Turn the tank cap counterclockwise until it can be

removed.

► Remove the fuel tank cap.

NOTICE

Bright light, sunlight and extreme temperatures can cause

the fuel mix to separate much faster. The trimmer can be

damaged if it is used with a fuel mix that has become

separated.
► Thoroughly mix the fuel.

► Do not use fuel mix that has been stored for more than 30

days.

► Fill the tank to within no more than 15 mm of the brim,

taking care not to spill any fuel.

► Fit the tank cap on the tank opening.

For video on this chapter visit

www.stihl.com/instruction-video.

0000-GXX-4727-A0

0000-GXX-4728-A0

«
...
19
20
21
22
23
...
»

Содержание FR 230





































Отзывы:

Нет отзывов