Stihl FR 230 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 36

Stihl FR 230 Скачать руководство пользователя страница 20

0458-735-0121-A

18

English

8 Adjusting Trimmer for User

► Place the thrust plate (8) on the shaft (1) so that its smaller

diameter faces up.

► Place the metal cutting attachment (7) on the thrust

plate (8).

► Place the thrust washer (6) on the metal cutting

attachment (7) so that its raised side faces up.

► Place the rider plate (5) on the thrust washer (6) so that its

closed side faces up.

► Insert the stop pin (9) in the bore as far as stop and hold

it depressed.

► Rotate the metal cutting attachment (7) clockwise until the

stop pin (9) engages in position.

The shaft (1) is now blocked.

► Fit the nut (4) counterclockwise and tighten it down firmly.
► Remove the stop pin (9).

7.5.2 Removing the Metal Cutting Attachment
► Shut off the engine.
► Insert the stop pin in the bore as far as stop and hold it

depressed.

► Rotate the metal cutting attachment clockwise until the

stop pin engages in position.

The shaft is now blocked.

► Unscrew the mounting nut clockwise.
► Remove stop pin.
► Remove the rider plate, thrust washer, metal cutting

attachment and thrust plate.

8.1 Fitting and Adjusting the Carrying System

► Put the carrying system on your back.
► Adjust straps until back padding is against your back.

8.2 Removing the Carrying System

► Shut off the engine.
► Loosen the straps.
► Take the trimmer off your back.

9.1 Mixing Fuel

This trimmer requires a fuel mixture of gasoline and two-

stroke engine oil., in a ratio of 50:1.

4

5

6
7
8

1

9

0000-GXX-4723-A0

8 Adjusting Trimmer for User

9 Mixing Fuel and Refueling the

Brushcutter

A video is available for this chapter

www.stihl.com/sxpweh

0000-GXX-4744-A0

«
...
18
19
20
21
22
...
»

Содержание FR 230





































Отзывы:

Нет отзывов