Stihl FR 230 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 36

Stihl FR 230 Скачать руководство пользователя страница 13

0458-735-0121-A

11

English

5 Safety Precautions

￭ The slide control is in position

for engine

starts. Engine RPM in position

is higher than

idle speed and the cutting attachment may rotate as soon

as the engine runs. This can result in serious injuries.
► Do not touch the cutting attachment.
► Start the engine as described in this instruction manual.

￭ The user cannot concentrate on the work in certain

situations. The user can lose control of the trimmer,

stumble or fall and be seriously injured.
► Work calmly and carefully.
► If light and visibility are poor: Do not use your trimmer.
► Operate the trimmer alone.
► Keep the cutting attachment close to the ground.
► Watch out for obstacles.
► Stand on the ground while working and keep a good

balance.

► If you begin to feel tired: Take a break.

￭ Exhaust gas is produced when the engine is running.

Breathing in exhaust gas can have toxic effects.
► Avoid inhaling exhaust gas.
► Operate the trimmer is a well ventilated location,
► In the event of nausea, headache, visual disturbances,

problems with hearing or dizziness: Stop work and seek

medical advice.

￭ The user’s ability to hear and assess noises is restricted

when wearing hearing protection with the engine running.
► Work calmly and carefully.

￭ The user will not be able to control the trimmer properly if

it is operated with the slide control in position

.

This can result in serious injuries.
► Check that the slide control is in position during

operation.

► Start the engine as described in this instruction manual.

￭ The rotating cutting attachment can cut the user. This can

result in serious injuries.
► Do not touch the rotating cutting attachment.
► If the cutting attachment is blocked by an object: Shut

off the engine. Then remove the object causing the

blockage.

￭ The machine can be damaged if you open the throttle

while the cutting attachment is blocked by an object.
► Shut off the engine. Then remove the object causing the

blockage.

￭ If the behavior of the trimmer changes during operation or

feels unusual, it may no longer be in a safe condition. This

can result in serious injuries and damage to property.
► Stop work and contact your STIHL dealer for

assistance.

￭ Trimmer vibrations may occur during operation.

► Take regular breaks.
► If signs of circulation problems occur: Seek medical

advice.

￭ If the cutting attachment makes contact with a foreign

object during operation, the object or parts of it may be

thrown at high speed. This may result in personal injuries

and damage to property.
► Clear away all foreign objects from the work area.

￭ If the rotating metal cutting attachment makes contact with

a hard object, sparks may occur and the cutting

attachment may be damaged. Sparks may cause a fire in

an easily combustible location. This can result in serious

or fatal injuries and damage to property.
► Do not work in an easily combustible location.
► Make sure the metal cutting attachment is in a safe

condition.

► Wear gloves.

«
...
11
12
13
14
15
...
»

Содержание FR 230





































Отзывы:

Нет отзывов