Stihl 561 C-M Скачать руководство пользователя страница 22

Страница: 22 / 28

–

Length without cutting tool: 1,760 mm

–

Max. fuel tank capacity: 990 cc (0.99 l)

19.2

Brushcutter STIHL 561 C-M

–

Displacement: 57.1 cm³

–

Engine power to ISO 8893: 2.8 kW (3.8 bhp)

at 9,500 rpm

–

Idle speed : 2,500 rpm

–

Max. output shaft speed: 7,890 rpm

–

Approved spark plug: NGKBPMR7A from

STIHL

–

Electrode gap of the spark plug: 0.5 mm

–

Dry weight without cutting attachment and

deflector: 10.2 kg

–

Length without cutting tool: 1,760 mm

–

Max. fuel tank capacity: 990 cc (0.99 l)

19.3

Sound Values and Vibration

Values

The K-value for sound pressure levels is 2 dB(A).

K-value for sound power levels is 2 dB(A). The

K-value for vibration level is 2 m/s².
Using with a mowing head

FS 511 C-M

–

Sound pressure level L

measured according

to ISO 22868: 101 dB(A).

–

Sound power level L

measured according to

ISO 22868: 114 dB(A).

–

Vibration level a

measured according to

ISO 22867:

–

Control handle: 3.7 m/s².

–

Left handle: 3.7 m/s².

FS 561 C-M

–

Sound pressure level L

measured according

to ISO 22868: 101 dB(A).

–

Sound power level L

measured according to

ISO 22868: 115 dB(A).

–

Vibration level a

measured according to

ISO 22867:

–

Control handle: 3.7 m/s².

–

Left handle: 3.7 m/s².

Using with a metal cutting attachment

FS 511 C-M

–

Sound pressure level L

measured according

to ISO 22868: 101 dB(A).

–

Sound power level L

measured according to

ISO 22868: 115 dB(A).

–

Vibration level a

measured according to

ISO 22867:

–

Control handle: 3.0 m/s².

–

Left handle: 3.0 m/s².

FS 561 C-M

–

Sound pressure level L

measured according

to ISO 22868: 102 dB(A).

–

Sound power level L

measured according to

ISO 22868: 115 dB(A).

–

Vibration level a

measured according to

ISO 22867:

–

Control handle: 3.3 m/s².

–

Left handle: 3.3 m/s².

For information on compliance with Employers'

Vibration Directive 2002/44/EC see

www.stihl.com/vib.

19.4

REACH

REACH is an EC regulation and stands for the

Registration, Evaluation, Authorisation and

Restriction of Chemical substances.
For information on compliance with the REACH

regulation see www.stihl.com/reach.

19.5

Exhaust Emissions

The CO

value measured in the EU type approval

procedure is specified at www.stihl.com/co2.
The measured CO

value was determined on a

representative engine in accordance with a

standardized test procedure under laboratory

conditions and does not represent either an

explicit or implied guarantee of the performance

of a specific engine.
The applicable exhaust emission requirements

are fulfilled by the intended usage and mainte‐

nance described in this instruction manual. The

type approval expires if the engine is modified in

any way.

English

19 Specifications

0458-856-0121-A. VA0.B21.

Содержание 561 C-M





























Результаты поиска

Содержание 561 C-M

Отзывы:

Stihl 561 C-M, Инструкция по эксплуатации, Страница: 22 / 28

Результаты поиска

Содержание 561 C-M

Отзывы: