Stihl 561 C-M Скачать руководство пользователя страница 13

Страница: 13 / 28

0000097397_001

► Place the thrust plate (5) on the shaft (6) so

that its smaller diameter faces up.

► Place the metal cutting attachment (4) on the

thrust plate (5). If you are fitting a circular saw

blade or a grass cutting blade with more than

4 cutting edges: Its cutting edges must face in

the same direction as the arrow on the deflec‐

tor.

► Place the thrust washer (3) on the metal cut‐

ting attachment (4) so that its raised side faces

up.

► Place the rider plate (2) on the thrust washer

(3) so that its closed side faces up.

► Insert the stop pin (7) in the bore up to the limit

stop and hold it depressed.

► Rotate the metal cutting attachment (4) coun‐

terclockwise until the stop pin (7) engages in

position.

The shaft (6) is now blocked.

► Fit the nut (1) counterclockwise and tighten it

down firmly.

► Remove the stop pin (7).
6.4.2

Mounting Brush Knives or Shredder

Blades

► Shut off the engine.

0000097398_001

► Place the thrust plate (5) on the shaft (6) so

that its smaller diameter faces up.

► Place the metal cutting attachment (4) on the

thrust plate (5). If a shredder bladee is used:

Align cutting edges so that they point away

from the gear unit in the direction of the nut

(1).

► Place the thrust washer (3) on the metal cut‐

ting attachment (4) so that its raised side faces

up.

► Place the protective ring (2) on the thrust

washer (3) so that the opening points

upwards.

► Insert the stop pin (7) in the bore as far as

stop and hold it depressed.

► Rotate the metal cutting attachment (4) coun‐

terclockwise until the stop pin (7) engages in

position.

The shaft (6) is now blocked.

► Fit the nut (1) counterclockwise and tighten it

down firmly.

► Remove the stop pin (7).
6.4.3

Removing the metal cutting attach‐

ment

► Shut off the engine.

► Insert the stop pin in the bore up to the limit

stop and hold it depressed.

► Rotate the metal cutting attachment clockwise

until the stop pin engages in position.

The shaft is now blocked.

► Unscrew the mounting nut clockwise.

► Remove the fastening parts, metal cutting tool

and pressure plate.

► Remove the stop pin.

6 Assembling the Trimmer

English

0458-856-0121-A. VA0.B21.

Содержание 561 C-M





























Результаты поиска

Содержание 561 C-M

Отзывы:

Stihl 561 C-M, Инструкция по эксплуатации, Страница: 13 / 28

Результаты поиска

Содержание 561 C-M

Отзывы: