manualshive.com logo in svg

Stihl 561 C-M, Инструкция по эксплуатации, Страница: 12 / 28

Поделиться
Скачать
Stihl 561 C-M Скачать руководство пользователя страница 12

1

2

0000097394_001

► Position the guard (1) on the gear housing.

► Insert the screws (2) and tighten them down to

a torque of 10 Nm.

6.2.2

Removing deflector for mowing heads,

metal cutting attachments and limit

stop

► Shut off the engine.

► Take out screws.

► Remove guard.
6.2.3

Mounting deflector for shredder blade

An additional holder is required on the shaft to

attach the deflector. The holder is attached to the

shaft with special screws and special tools.

► Shut off the engine.

► If the holder for the guard has not yet been fit‐

ted to the shaft: Have the holder fitted by a

STIHL dealer.

3

3

3

3

4

2

1

0000097395_001

► Place the guard (1) on the holder (2) so that

the curved side faces inwards towards the

gear unit housing.

► Insert the screws (3) and tighten them down to

a torque of 10 Nm.

► Press plugs (4) into the threaded holes on the

gear unit housing.

The threaded holes are protected from dirt.

6.2.4

Dismantling the guard for shredder

blades

► Shut off the engine.

► Take out screws.

► Remove guard.

► Pull the plug out of the threaded holes on the

gear unit housing and press it into the threa‐

ded holes of the bracket.

The threaded holes of the bracket are protec‐

ted against dirt.

6.3

Mounting and Removing the

Mowing Head

6.3.1

Mounting the Mowing Head

► Shut off the engine.

1

1

2
3

4

4

0000097396_001

► Place the thrust plate (2) on the shaft (3) so

that its smaller diameter faces up.

► Fit the mowing head (1) on the shaft (3) and

turn it counterclockwise by hand.

► Insert the stop pin (4) in the bore up to the limit

stop and hold it depressed.

► Turn the mowing head (1) counterclockwise

until the stop pin (4) engages in position.

The shaft (3) is now blocked.

► Tighten down the mowing head (1) firmly by

hand.

► Remove the stop pin (4).
6.3.2

Removing the Mowing Head

► Shut off the engine.

► Insert the stop pin in the bore as far as stop

and hold it depressed.

► Rotate the mowing head until the stop pin

engages in position.

The shaft is now blocked.

► Unscrew the mowing head clockwise.

► Remove the thrust plate.

► Remove stop pin.

6.4

Removing and Installing Metal

Cutting Attachment

6.4.1

Mounting grass cutting blade, brush

knife or circular saw blade

► Shut off the engine.

English

6 Assembling the Trimmer

12

0458-856-0121-A. VA0.B21.

Содержание 561 C-M





























Отзывы:

Нет отзывов