Stiga GM Li 10.8, Инструкция по эксплуатации

Страница: 71 / 132

EN | Operating Instruction
GB-5
•
This machine may cause serious injuries. Please
read the instruction manual carefully as to the cor-
rect handling, the preparations, the maintenance
and the proper use of the hedge trimmer. Familiar-
ize yourself with the machine before the first use
and also have yourself introduced to practical use
of the machine.
•
The cutting tool continues to run after the device
is switched off.
•
Turn off power before cleaning.
• Beware! Keep your fingers away from the cutting
area!
•
Only switch on the device if your hands and feet
are away from the cutting tools.
•
Remove all debris from the working area before
use and pay attention to such debris while working!
•
Turn the machine off before transporting and wait
until the blade stops moving. Maintenance and
cleaning should be performed only when the ma-
chine is turned off.
•
Children and teenagers under 16 years of age
must never use this device!
•
Never permit children or persons who are not
familiar with the operating instructions to use this
device.
•
Statutory regulations can restrict the age of the
operator.
•
Be aware of third persons in the work area.
•
Use of the machine must be prevented is people,
especially children and house pets are present.
• Only use the shear in daylight or sufficiently bright
artificial illumination.
•
The clippers must be subjected to regular main-
tenance and checks. Damaged blades must be
replaced as a pair. Professional repair is required
if damage occurs due to impact.
•
The machine should be inspected and maintained
regularly by a responsible repair service only.
•
Wear suitable working clothes, i.e. protective glass-
es, protective means for ears, non-slippery shoes
and working gloves. Do not wear broad clothes
which could be caught by the moving parts.
• After you finish using the clippers and before
cleaning them, it is necessary to ensure that the
machine cannot be accidentally turned on, such
as by unlocking the switch.
•
Check the cutting unit regularly for damage
•
Never hold the clippers by the blades, you may
run the risk of injury even when the clippers are
not moving!
•
Never touch moving blades in an attempt to re-
move debris or if the blades are blocked. Always
switch off the device.
•
Keep the machine away from children and store it
in a safe place.
•
When working with the shears, always take a sta-
bile standing position, particularly when you are
using steps or a ladder.
•
Do not use shears with a damaged or excessively
worn-out cutting part
•
Ensure that all protective devices and handles
are installed on the machine. Never try to put an
incomplete machine in operation.
•
Always use the protective part designed for the
blade when transporting and storing the shears.
•
Before starting the work, make yourself famil-
iar with the surroundings and possible dangers
which you may not hear because of the noise.
•
Only use the spare parts and accessories recom-
mended by the manufacturer.
•
Note that the user shall be responsible himself for
accidents and hazards that result to other people
or their property.
•
Prior to using the machine, inspect it visually for
damaged, missing, or incorrectly attached protec-
tive devices or coverings.
•
Never use the machine with damaged coverings
or protective devices or without the covering or
protective devices.
•
Eye protection, long pants, and sturdy footwear
must be worn the entire time the machine is used.
•
The machine should not be used in case of poor
weather conditions, especially in case of lightning.
•
Always switch off the machine
- if the machine is left unattended.
- before inspecting or working on the machine
- after contact with foreign objects
- if the machine begins to vibrate strangely
•
Always ensure that the ventilation openings are
kept free of foreign objects.
•
Always maintain your balance to stand securely
on slopes. Walk, don’t run.
•
Warning! Do not touch moving dangerous parts
before the machine has been switched off and the
moving dangerous parts have come to a complete
standstill.
•
A tingling feeling or numbness in the hands is
sign of excessive vibration. Limit the operating
time, take sufficiently long work breaks, distribute
the work between several people or wear anti-
vibration gloves when using the tool for extended
periods.