Stiga 13-7454-11, Руководство по ремонту

Страница: 116 / 123

6.5.3 Replacing switches
The switches are pressed into place in
their respective rectangular holes in the
control panel. To change a switch, follow
the procedure below:
1. Remove the relevant protection to
make the switch accessible.
2. Press in the fixing hook in the connec-
tion and pull the connection from the
switch.
See figure.
Certain connections have 2 fixing
hooks.
3. Press the fixing tabs, on both sides of
the switch, against the switch. Use a
screwdriver or similar to slide the
switch up.
See figure.
6.5.4 Replacing switch controls
To remove the switch use a special tool .
The tool reference number is in the re-
placement parts list.
Remove the button by pressing in the tool
from behind. Press until the button hops
up.
The button is easily installed by pushing
down into the switch hole.
WORKSHOP MANUAL
TITAN
Chapter
6 - Electrical system
EDITION
2018
Page
11 4