EN User Guide
STIER Industrial GmbH
18
EN
4
Product overview
4.1
Intended use
The power tool is designed for hammer drilling in concrete, brick and stone and for light chiselling
work. It is also suitable for drilling without impact in steel, wood, plastic and concrete.
4.2
Technical data
4.3
Detailed view (see page 2)
No.
Description
No.
Description
1
Housing
5
Auxiliary handle
2
On/Off switch
6
Mains cable
3
Mode selector switch
7
Signal diode*
4
Rotation selector switch
8
Drill chuck protection
4.4
Scope of delivery:
•
1 x 1 x STIER hammer drill SHB-L-4100
•
- 1 x auxiliary handle
•
- 1 x drill chuck guard
•
- 1 x carbon brush set
•
- 1 x pointed chisel
•
- 1 x drill bit
•
- 1 x grease
•
- 1 x ruler for depth adjustment
•
- Instruction manual
5
Commissioning
5.1
Before commissioning
•
Inspect the drilling site for hidden electrical
cables, gas and water pipes using a cable/pipe
detector before drilling.
•
Before connecting to the mains, make sure
that the mains voltage corresponds to the
rating plate.
Check the integrity of the hammer drill before
each use. Do not work with damaged power tools.
Also check the network cable.
STIER hammer drill SHB-L-4100 (905315)
Voltage
230-240 V / 50 Hz
Power consumption
1.500 W
Rated speed
480 bpm
Hammer frequency
4,100 bpm
Clout
12 J
Shaft design
SDS max
Max. Drilling capacity (concrete)
40 mm
Insulation class
II
Protection class
IP 20
Noise level (sound pressure LpA +/- K)
93.8 +/- 3 / 95.8 +/- 3 dB(A)
Noise level (power LwA +/- K)
104.8 +/- 3 / 106.8 +/- 3 dB(A)
Vibration level
14.98 +/- 1.5 / 13.02 +/- 1.5 m/s²
Weight drill
7,05 kg
Drill dimensions (L x W x H)
425 x 462 x 268 mm
Total weight
9,85 kg
Overall dimensions (L x W x H)
370 x 462 x 135 mm
Cable length
2 m
