Stienen BE PL-9000, Руководство пользователя

Страница: 37 / 42

33
Overview mutations
An overview of the mortality, the number of animals unloaded (out) and the number of animals added (in) per
day is shown.
Overview present animals
An overview of the daily remaining number of animals in the house is shown.
Entry date data
This data in this screen has to be entered at the start of new entry (a new round). The poultry computer uses
this data to calculate the remaining number of animals, the feed dosage etc.
If there are two or more groups of animals, the fill ratio depends on the sum of the total number of animals of
all animal groups added together.
Entry date The entry date is entered automatically if you enter “yes” at “New entry”.
The poultry computer uses these “Entry date” to calculate the animal age. Beside that
the “Entry date” is used to fill in the mutation table. The poultry computer can store
the data of the past 7 days.
Number at entry This is the number of animals at the time of entry.
New entry If you enter “yes” at “New entry”:
The mortality table is erased.
The entry date is fill-in.
The fill ratio is re-calculated (if the fill ratio depends on the entry data)
Feed dosing is started (if a feeding cycle is active)
Silos
The current silo contents are (stock or shortage) is
indicated. You can also enter the filled volume per
silo; this is then added directly to the silo contents
and the filled counter is reset to 0 automatically
Attention! You can only enter a positive silo content
when you press the enter key, any negative values
are erased.