Stiegelmeyer Seta pro, Инструкция по эксплуатации

Страница: 81 / 168

9.3 Setting the normal position
9.3.1 On the control box
9.4 Setting the auto contour position
The height and the angle of tilt into a reverse-Trendelenburg position from the normal po-
sition can be individually set on the control box. The backrest and thigh rest always re-
main in the horizontal position.
If the thigh rest or backrest is locked, this function cannot be selected.
1 Keep one of the two unlock buttons pressed.
2 In addition, press the locking button concerned for an unlocked
function (green LED on) to lock the adjustment function. The sta-
tus can be changed from locked to unlocked and vice versa by
alternating between these buttons.
3 Place the control box back in the linen holder.
In the normal position, the mattress base, backrest and thigh rest are horizontal, and the
mattress base is set to a height of approximately 60 cm.
This function can only be activated on the control box when all adjustment functions have
been unlocked.
1 Press the normal position button and the unlock button at the
same time to set the mattress base, backrest and thigh rest to
this position.
In the auto contour UP position, first the thigh rest and directly following, the backrest, are
raised.
When auto contour DOWN is set, the backrest, and then the thigh rest, are lowered. This
prevents the patient from sliding towards the foot end of the bed.
Use/routine
Instruction Manual 72