INSTALLATION
Safety
12
| MAE | MAZ | MAW www.stiebel-eltron.com
INSTALLATION
5. Safety
Only qualified contractors should carry out installation, commis-
sioning as well as maintenance and repair of the product.
5.1 General safety instructions
We guarantee trouble-free function and operational reliability only
if original accessories and spare parts intended for the product
are used.
5.2 Instructions, standards and regulations
Note
Observe all applicable national and regional regulations
and instructions.
6. Installation
MAE
26
�0
2�
10
�0
08
5
1
3
2
4
5
6
7
8
9
10
12
11
1 Aerator inside the fitting (spanner size 22)
2 U-shaped profile washer
3 U-shaped pressure washer
4 Drain cup
5 Gasket
6 Profile gasket
7 Drain outlet
8 Spring sleeve (spanner size 13)
9 Fitting G 3/8
10 Knuckle joint
11 Seal ring
12 Pull rod
f
f
Insert the tap with seal ring.
f
f
Secure the tap from below with a U-shaped profile washer,
U-shaped pressure washer and spring sleeve.
f
f
Unscrew the drain funnel from the tundish.
f
f
Insert the drain cup with the gasket from above.
f
f
Secure the drain outlet with the profile gasket from below.
f
f
Insert the pull rod into the tap body.
f
f
Secure the pull rod and connect it to the knuckle joint with
the drain trim.
MAZ
26
�0
2�
10
�0
08
4
1
4
3
2
5
6
7
8
1 Aerator inside the fitting (spanner size 22)
1 Spout fitting (spanner size 30)
2 Fitting G 3/8
3 Seal ring
4 Spacer
5 U-shaped profile washer
6 U-shaped pressure washer
7 Spring sleeve (spanner size 13)
f
f
Insert the tap with seal ring.
f
f
Secure the tap from below with a U-shaped profile washer,
U-shaped pressure washer and spring sleeve.
f
f
Fit the spout to the tap body.
