STI Prep/Master 2807 страница 27 Скачать руководство пользователя

Страница: 27 / 36

Operating Manual

STI-2807 | STI-2818LP

Machinery Qualifications

The #0 Prep Tool is designed to attach to and work perfectly with any Substrate Technology Prep/

Master

machine. Quantity of #0 Prep Tool will vary by model:

• Prep/Master

2807/2818LP & P/M Jr.: 6 pieces

• Prep/Master

2420/2418LP: 12 pieces

• Prep/Master

3030/3038LP & RC-3030: 12 pieces

• Prep/Master

4430/4438LP & RC-4430: 24 pieces

2) #00 PCD Prep Tool (leaves a rough profile)

Description

The #00 Prep Tool is a combination PCD/metal bond preparation tool that has the EG

attachment system as a standard for use on any P/M machines. The #00 Prep Tool is

directional. This means that any set of #00 Prep tools will always contain 50% right-hand

tools and 50% left-hand tools. Its uses are to remove adhesives, thin-sets, surface

inequalities of +/-4mm and epoxy coatings with thickness of less than 4mm. The #00

Prep Tool is designed to be used as a dry removal tool only.
The #00 Prep Tool is made for use on concrete and should never be chosen to grind

terrazzo, marble, or granite. The concrete profile after using the #00 Prep Tool will be one that is

considered rough to the touch having up to 1mm deep grooves. Approximate life of the #00 Prep Tool

is 30,000SF / 2,787 M

Execution

1. Attach the #00 Prep tools to the P/M machine by placing

the right-hand tools (#00R) in the tool holders that are

turning clockwise and the left-hand tools (#00L) in the

tool holders that are turning counter-clockwise.

2. Place the P/M machine in the operating position. Attach

appropriate power* and vacuum dust collection hose to

the P/M machine.

3. With weights in neutral position** or off machine, start

the machine and adjust speed to 40Hz (electric) or 2500

RPM (propane).

4. Upon starting the machine, continuously move machine

in side-to-side pattern ensuring that machine is continuously moved while running. If for any reason

the machine cannot be continuously moved, i.e. cord management, adjacent work, obstacles, etc.,

stop the machine until it can be operated as specified above.

5. Upon satisfactory completion of surface prep, remove P/M machine and vacuum clean surface.

* Power source voltage will vary by P/M machine being used and should be verified for compatibility

before connecting machine to it. Dust collection by appropriate vacuum is compulsory as harmful and

damaging dust will be produced if dust collection is not used or is of inadequate capacity. The life of the

#00 Prep Tool will also be significantly reduced if vacuum is not of appropriate capacity.
** The Prep/Master

machines all have pocket weights for the purpose of varying the grinding pressure

of the machine. It is suggested to begin with the #00 Prep Tool with no added weight to gauge

performance. If the tool is not aggressive enough, simply add more weight to the grinding head of P/M

machine to increase grinding pressure. If #00 Prep Tool is too aggressive, simply add more weight to

the handle to reduce grinding pressure.

Содержание Prep/Master 2807





































Результаты поиска

Содержание Prep/Master 2807

Отзывы:

Похожие инструкции для Prep/Master 2807

Бренды по названию

Популярные бренды

STI Prep/Master 2807, Руководство по эксплуатации

Результаты поиска

Содержание Prep/Master 2807

Отзывы:

Похожие инструкции для Prep/Master 2807

Бренды по названию

Популярные бренды