SteyrTek ST-1110, Руководство пользователя

Страница: 37 / 50

Käyttöohje
User’s manual
7.4. Inputting the rim’s data and balancing with the ALU-1 mode
Follow the instructions in chapter 7.2. to input the rim’s data and press the [MODE] key to enter ALU-1 balancing
mode (Fig 10).
Rotate the wheel by hand, and as the screen says ”RUN ---”, take your hands off the wheel and let it spin. As the
screen says “STOP”, the wheel will stop and the screen will display the data of the wheel’s balance.
Rotate the wheel slowly. As the inner indicators all light up (10, Fig 3), attach the wheel, weight whose weight is
displayed on the left screen, to the inner edge of the rim to twelve o’clock (Fig 11 left). Rotate the wheel slowly
again. As the outer indicators all light up (11, Fig 3), attach the wheel weight, whose weight is displayed on the
right screen, to the outer edge of the rim to twelve o’clock (Fig 11 right). Rotate the wheel slowly again by hand,
and take your hands off the wheel as the display says “RUN ---”. When the display turns on again, the wheel will
stop and the balancing will be complete.
7.5. Inputting the rim’s data and balancing with the ALU-2 mode
Follow the instructions in chapter 7.2. to input the rim’s data and press the [MODE] key to enter ALU-1 balancing
mode (Fig 12).
Rotate the wheel by hand, and as the screen says ”RUN ---”, take your hands off the wheel and let it spin. As the
screen says “STOP”, the wheel will stop and the screen will display the data of the wheel’s balance.
Rotate the wheel slowly. As the inner indicators all light up (10, Fig 3), attach the wheel, weight whose weight is
displayed on the left screen, to the inner edge of the rim to twelve o’clock (Fig 13 left). Rotate the wheel slowly
again. As the outer indicators all light up (11, Fig 3), attach the wheel weight, whose weight is displayed on the
right screen, to the outer edge of the rim to twelve o’clock (Fig 13 right). Rotate the wheel slowly again by hand,
and take your hands off the wheel as the display says “RUN ---”. When the display turns on again, the wheel will
stop and the balancing will be complete.
[37]
Fig 10
Fig 11
Fig 12
Fig 13