Käyttöohje
User’s manual
6. Attaching and detaching the wheel
6.1. Checking the wheel
Make sure that the tire is clean and there is no sand or dust on its surface. Remove any wheel weights. Check that
the tire pressure is correct and that there are no damages to the rim or its holes.
6.2. Attaching the wheel
Select the optimal cone that fits the center hole of the rim.
There are two ways to attach the wheel: the positive position A and the negative position B.
A. Positive position (Fig 4-1):
The positive position is the most common one. It is easy to use and it fits most traditional aluminum and
steel rims.
B. Negative position (Fig 4-2):
The negative position can be used with rims that have a deformed outer side. Use it with thick steel rims
also
6.3. Detaching the wheel
Detach the handle and the cone.
Lift the wheel off the shaft.
NOTE:
If the wheel slides off the shaft, the shaft can be damaged.
[34]
Fig 4-1
Fig 4-2
Содержание ST-1110
