STEYR MO114K33, Руководство по эксплуатации, техническому обслуживанию и гарантии

Страница: 19 / 118

19
START
ON
OFF
BUKH STEYR MOTORS SOLAS
G
F
Starting the Engine (for SOLAS only)
Starting procedure for the STEYR MOTORS marine engine is the same for cold or warm operating condition. The
engine control unit automatically regulates the fuel supply and the preheating period , for any given temperature.
Therefore, the throttle lever should remain in neutral position.
1. To start the engine, move throttle lever into idle
position and gear into neutral position.
2. Press the push button for ignition (ill.F; red)
(push button lock in place); An audible alarm
will sound and the warning lights are illumiated
(temporary), indicating the correct function of
the audible and visual warning system.
NOTE: In case of a low temperature
start, wait until the combined
oil pressure/glow plug pre-
heating indication light is
turned off, then continue with
the start procedure.
3. Press the button START (ill.G; green) and hold
in this position until “starting” of engine, but
under no circumstances hold in this position for
more than ten seconds.
If engine does not start, release start – push
button momentarily and repeat starting
procedure .
4. As soon as engine starts, release start button.
The audible alarm will stop when normal oil
pressure has been reached.
ATTENTION: If engine fails to start within one minute and/or repeated attempts, contact your STEYR
MOTORS Marine dealer.
Never push start button when engine is running.
q
Stopping the Engine (for SOLAS only)
1. Move throttle lever into idle position and gear in neutral position.
2. Cool down the engine.
3. Press push button ignition ON/OFF (ill.F) to disengage from locking position and to shut OFF the engine.
ATTENTION: Do not stop engine at speeds above idle or “accelerate” engine while turning off engine. This
may result in engine failures.
q