Stewart Filmscreen Corp VCS-1007, Руководство пользователя

Страница: 7 / 16

Video Conference Screen: Owner’s Manual 5
S
TEP
1. H
ANGING THE
C
ASE
Professional mounting techniques should be used. Stewart Filmscreen
Corporation cannot be liable for substandard or faulty installations.
Make sure that you mount the screen so that the electrical box is on the left
side (audience left).
The Video Conference Screen is fully assembled and ready to install into
the ceiling or soffit. A false ceiling is not intended to support the weight of
this product. The unit can be bolted directly to the support structure or
suspended. Chain or threaded rod is typically used for suspended type
installations. If the unit is to be mounted to plaster, masonry or other type of
surface, use appropriate fasteners. Always use high grade / rated hardware.
1. Mount the housing via the mounting brackets located on the top
ends.
- Use the drilled holes on these ends for the specified mounting
hardware.
- Use appropriate attachment hardware to secure the housing. Use
case hardened or rated fasteners.
2. Install the unit onto the support structure making sure that the
bottom of the case is flush with the finished ceiling plane.
- Avoid case torque or twisting as operational difficulties will ensue.
- Do not compress the front to back with ceiling treatment as this too
will cause improper door operation.
3. Use a carpenter's level to make sure the housing is level end to
end as well as front to back. After mounting, check the door to
make sure it is flush to the box at both ends and that there is
proper clearance around its entire perimeter. Readjust mounting if
required at this time.
4. Drywall or other ceiling material may be run flush to the housing.
It is essential not to "compress" the housing front to back with any
ceiling treatment or tiles as this will cause faulty door operation.